#include "TinyWireM.h"
#include "TinyOzOLED.h"
const int boton = 3;
const int led = 1;
int buttonState = 0;

const unsigned char FabLogo[] PROGMEM = {
  0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0, 0x60, 0x70, 0x38, 0x38, 0x78, 0x7C, 0xFC, 0xFC,
  0xEE, 0xEE, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xEE, 0xCE, 0xDE, 0x9C, 0x1C, 0x1C, 0x18, 0x38, 0x38,
  0x70, 0x60, 0xE0, 0xE0, 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0xF8, 0xF8, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x18, 0x00, 0x00, 0x00, 0x80, 0xE0, 0xF0, 0x78,
  0x18, 0x38, 0xF8, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xF8, 0xF8, 0xD8, 0xD8, 0xD8,
  0xD8, 0xD8, 0xF8, 0xF8, 0x30, 0x00, 0x00, 0x00, 0xF8, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xE0, 0x38, 0x08, 0x18, 0x70, 0xE0, 0x80, 0x00, 0x00,
  0x00, 0xF8, 0xF8, 0xF8, 0x88, 0x88, 0x88, 0x88, 0x88, 0xD8, 0xF8, 0x70, 0x00, 0x00, 0x00, 0x00,
  0x00, 0xF0, 0xFC, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x03, 0x07,
  0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x07, 0x03, 0x80, 0x80, 0xC0, 0xC0, 0xC0,
  0xC0, 0x80, 0x80, 0xC0, 0xC0, 0xFE, 0xFF, 0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x3F, 0x3F, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x20, 0x38, 0x3E, 0x1F, 0x07, 0x07, 0x06,
  0x06, 0x06, 0x06, 0x07, 0x0F, 0x3F, 0x3C, 0x30, 0x00, 0x00, 0x3F, 0x3F, 0x3F, 0x30, 0x30, 0x30,
  0x31, 0x39, 0x39, 0x1F, 0x1F, 0x0E, 0x00, 0x00, 0x3F, 0x3F, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
  0x30, 0x30, 0x00, 0x30, 0x3C, 0x0F, 0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x03, 0x07, 0x1E, 0x38,
  0x00, 0x3F, 0x3F, 0x3F, 0x30, 0x30, 0x30, 0x30, 0x30, 0x10, 0x19, 0x1F, 0x0E, 0x00, 0x00, 0x00,
  0x00, 0x07, 0x1F, 0x7F, 0xFF, 0xC0, 0x80, 0x80, 0x0F, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
  0xFE, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x7E, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x3F, 0x3F,
  0x1F, 0x0F, 0x83, 0x83, 0xC3, 0xFF, 0x3F, 0x1F, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFE, 0xFE,
  0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFE, 0x00, 0x00, 0x00, 0xF8, 0xFC, 0x9E, 0x06, 0x03, 0x03,
  0x02, 0x06, 0x00, 0x0C, 0x1E, 0x3E, 0x33, 0x73, 0xE3, 0xE2, 0xC0, 0x00, 0x00, 0xFE, 0xFE, 0xFE,
  0x0E, 0x3E, 0xF8, 0xE0, 0x00, 0xC0, 0xF8, 0x3E, 0x0E, 0xFE, 0xFE, 0xFE, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x07, 0x0F, 0x0F, 0x0F, 0x1F, 0x1F, 0x1F,
  0x38, 0x38, 0x30, 0x30, 0x00, 0x30, 0x30, 0x38, 0x38, 0x18, 0x18, 0x1C, 0x1C, 0x0E, 0x0E, 0x07,
  0x07, 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03,
  0x03, 0x06, 0x06, 0x02, 0x03, 0x03, 0x01, 0x00, 0x00, 0x00, 0x01, 0x03, 0x03, 0x03, 0x02, 0x06,
  0x02, 0x03, 0x00, 0x03, 0x02, 0x02, 0x06, 0x06, 0x03, 0x03, 0x01, 0x00, 0x00, 0x03, 0x03, 0x03,
  0x00, 0x00, 0x01, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

void setup() {
  pinMode(led, OUTPUT);
  pinMode(boton, INPUT);
  OzOled.init();
  OzOled.sendCommand(0xA1);   //orientation
  OzOled.sendCommand(0xC8);
  OzOled.setNormalDisplay();  // Invert display
  OzOled.setCursorXY(0, 0);
  OzOled.printString("DEVICE: ON");
  OzOled.setCursorXY(0, 2);
  OzOled.printString("ATTINY85 BOARD");
  OzOled.setDeactivateScroll();
  delay(2000);
  OzOled.clearDisplay();
  OzOled.drawBitmap(FabLogo, 0, 0, 16, 8);
}

void loop() {
  buttonState = digitalRead(boton);

  if (buttonState == LOW)
  {
    OzOled.setDeactivateScroll();
    OzOled.clearDisplay();
    OzOled.setCursorXY(0, 0);
    OzOled.printString("OUTPUT DEVICES");
    OzOled.setCursorXY(0, 1);
    OzOled.printString("CESAR VALDIVIA");
    OzOled.setCursorXY(0, 2);
    OzOled.printString("TEST 1");
    OzOled.setCursorXY(0, 3);
    OzOled.printString("SUCCES!!! :)");
    for (int i = 0; i <= 10; i++) {
      digitalWrite(led, HIGH);
      delay(100);
      digitalWrite(led, LOW);
      delay(100);
    }
  }
  else {
    digitalWrite(led, LOW);
  }
}