1. 4. Create Pocket or Slot
FreeCAD lesson 4 by Apeksha Siddharth
3. How to create hole in Freecad
FreeCAD lesson 3 by Apeksha Siddharth
This is Lesson 3 in a serie of tutorials on freecad by Apeksha Siddharth.
Fabacademy 2020 - Series
This series guides you through getting started on our platform.
-
-
2. 1. Create scketch, diamention, fillet
FreeCAD lesson 1 by Apeksha Siddharth
-
3. 2. Sketcher mode to part mode & pad command
FreeCAD lesson 2 by Apeksha Siddharth
-
4. 3. How to create hole in Freecad
FreeCAD lesson 3 by Apeksha Siddharth
-
5. 6. :Sweep command (Square/Circular Pipe)
FreeCAD lesson 6 by Apeksha Siddharth
-
6. 5. Create Loft
FreeCAD lesson 5 by Apeksha Siddharth