15. Mechanical design¶
Assignments for the week¶
Group assignments¶
- Design a machine (mechanism + actuation + automation), including the end effector, build the passive parts and operate it manually.
Individual assignment¶
- Explained your individual contribution to this project on your own website.
Requirements for group¶
- Shown how your team planned and executed the project.
- Described problems and how the team solved them.
- Included your design files.
- Included your design files and ‘hero shot’ photos of the mould and the final object.
- Optionally included an aprox. 1 min video (1920x1080 HTML5 MP4) + slide (1920x1080 PNG).
Group assignments¶
See 2019 Fablab Taipei Group site Week 15
Individual assignment¶
Syringe pumps¶
Commercially available pumps¶
NE-1002X Programmable Microfluidics Syringe Pump
USD 1500
CONTEC SP900 US $649
Syringe Pumps Machine price unknow
T34™ Syringe Pump
price unknow
BOM¶
| Parts | Spec. | Quantity |
|---|---|---|
| syringe | 5 - 10 ml | 4 |
| Screw | M5 * 100 mm | 4 |
| Screw and nut | M3 * 16 mm | ~20 |
| Milling wax | - | 1 |
| Silicone resin | - | - |
| Epoxy resin | - | - |
Make a four channels syringe pumps.¶
Draw the syringe holder 2D plan.
Laser cut and assemble it.
molding and cast the connector ( see week 10 for the progress)
Install four rails and push/pull parts for each channel.
Test it by hands.
Put in syringe and test by hands again.
