<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Right Angle</h3>
tPlace shows angle of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>SMD - 6 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Locking Footprint with Long Pads</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin Locking Header</h3>
Includes silk outline for 6 pin female header
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -6 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 6</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Header - 6 pin Female SMD</h3>
Right angle 0.1"
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/19686.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin Holes</h3>
No silk, no plating
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p><h3> 6 Pin SMD Female Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Female Header</h3>
Alternate pin configuration
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Female Header - Combined Footprint</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Male Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>JST SH Vertical 6-Pin Connector -SMD</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1mm</li>
<p><b><a href="https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet referenced for footprint</a></b></p>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
<li>EM-406</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE>NAME>VALUE<h3>Plated Through Hole - 5 Pin</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch: 1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin Long Pad with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>SMD - 5 Pin</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://www.sparkfun.com/datasheets/GPS/EM408-SMDConnector.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05</li>
<li>EM-408</li>
</ul></p>>NAME>VALUE<h3>SMD - 5 Pin Right Angle</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 5 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:5</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>JST 5 Pin Right Angle Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 5</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>JST 5 Pin Vertical Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 5</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -5 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 5</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05</li>
</ul></p>>NAME>VALUE<h3>6 Pin Connection</h3>>VALUE>NAME<h3>5 Pin Connection</h3>>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/9280"> Arduino Stackable Header - 6 Pin</a> (PRT-09280)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE<b>SUPPLY SYMBOL</b><b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>Resistor (US Symbol)</b>
<p>
Variants with postfix FAB are widened to allow the routing of internal traces
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.