<h3>SparkFun Electromechanical Parts</h3>
This library contains electromechanical devices, like motors, speakers,servos, and relays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>12mm Buzzer - PTH</h3>
<p>This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/General/cem-1203-42-.pdf">Datasheet</a></p>
<h4>Devices Using</h4>
<ul><li>BUZZER</li></ul>>NAME>VALUE<h3>9mm Buzzer - SMD</h3>
<p>This is a small 9mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.</p>
<p><a href="http://www.challengeelectronics.com/downloads/sound_transducers/electromagnetic_smd/CEET105A025-16-2545-27MLR.pdf">Datasheet</a></p>
<h4>Devices Using</h4>
<ul><li>BUZZER</li></ul>>NAME>VALUE<h3>12mm Buzzer - PTH (No silkscreent variant)</h3>
<p>This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/General/cem-1203-42-.pdf">Datasheet</a></p>
<h4>Devices Using</h4>
<ul><li>BUZZER</li></ul>+>NAME>VALUE<h3>12mm Buzzer - PTH (KIT, No-Silkscreen VARIANT)</h3>
<p>This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.</p>
<p><b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/General/cem-1203-42-.pdf">Datasheet</a></p>
<h4>Devices Using</h4>
<ul><li>BUZZER</li></ul>+>NAME>VALUE<h3>9mm Buzzer - SMD (KIT variant)</h3>
<p>This is a small 9mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.</p>
<p><b>Warning:</b> This is the KIT version of this package. This package has longer pads to aid in hand soldering.</p>
<p><a href="http://www.challengeelectronics.com/downloads/sound_transducers/electromagnetic_smd/CEET105A025-16-2545-27MLR.pdf">Datasheet</a></p>
<h4>Devices Using</h4>
<ul><li>BUZZER</li></ul>>NAME>VALUE<h3>12mm Buzzer - PTH (KIT VARIANT)</h3>
<p>This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.</p>
<p><b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/General/cem-1203-42-.pdf">Datasheet</a></p>
<h4>Devices Using</h4>
<ul><li>BUZZER</li></ul>+>NAME>VALUE<h3>Buzzer</h3>>NAME>VALUE<h3>Buzzer</h3>
<p>Small round buzzers that operate around the audible 2kHz range. You can use these as speakers to create simple music or user interfaces.</p>
<p>Variant Overview:
<ul>
<li><b>PTH - </b> <a href="https://www.sparkfun.com/products/7950">Mini Speaker - PC Mount 12mm 2.048kHz</a></li>
<li><b>PTH_KIT - </b> <a href="https://www.sparkfun.com/products/7950">Mini Speaker - PC Mount 12mm 2.048kHz</a></li><ul><li> KIT simplifies soldering by adding stop mask to one side of the pads.</li></ul>
<li><b>PTH_NO_SILK - </b> <a href="https://www.sparkfun.com/products/7950">Mini Speaker - PC Mount 12mm 2.048kHz</a></li><ul><li> No silkscreen indicator of buzzer outline.</li></ul>
<li><b>PTH_KIT_NO_SILK - </b> <a href="https://www.sparkfun.com/products/7950">Mini Speaker - PC Mount 12mm 2.048kHz</a></li><ul><li> KIT package w/o silkscreen</li></ul>
<li><b>SMD - </b> Buzzer Audio Magnetic (CCV-084B16)</li> <ul><li>SMD buzzer used on, e.g. the <a href="https://www.sparkfun.com/products/8463">LilyPad Buzzer</a> and <a href="https://www.sparkfun.com/products/9963">RFID USB Reader</a>.</li></ul><li><b>SMD_KIT - </b> Buzzer Audio Magnetic (CCV-084B16)</li><ul><li>SMD Buzzer with elongated pins to make soldering easier. Used on the <a href="https://www.sparkfun.com/products/10935">SparkFun Simon Says - Surface Mount Soldering Kit</a>.</li></ul>
</ul>
</p><b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE<b>SUPPLY SYMBOL</b><h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - 3 Pin</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>PTH - 3 Pin Vertical Molex Polarized Header</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 3 Pin Locking Footprint</h3>
Pins are staggered 0.005" off center to lock pins while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint</h3>
Holes are offset 0.005" from center to lock pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>PTH - 3 Pin Vertical Molex Polarized Header</h3>
Pins are offset 0.005" from center to lock pins in place during soldering.
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH Locking</h3>
Holes are offset 0.007" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 3 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 3 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>JST 3 Pin Right Angle Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>+-S>NAME>VALUE<h3>Pogo Pins - 3 Pin</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 5mm Pitch -3 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline</h3>
Holes are offset from center 0.005" to lock pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>JST 3 Pin Right Angle SMT</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 3 Pin SMD</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>SMD - 3 Pin Right Angle Female Header</h3>
Silk outline of pin location
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>SMD- 3 Pin Right Angle Male Headers</h3>
No silk outline, but tDocu layer shows pin location.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>JST 3 Pin Vertical Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>+-S>NAME>VALUE<h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p><h3>JST 3 Pin Right Angle Plated Through Hole – NO SILK</h3>
<p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>+-S>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK</h3>
<p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>>NAME>VALUE<h3>3 Pin Connection</h3>>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/13875"> Stackable Header - 3 Pin (Female, 0.1")</a> (PRT-13875)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings.<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>Resistor (US Symbol)</b>
<p>
Variants with postfix FAB are widened to allow the routing of internal traces
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.