<h3>Plated Through Hole - 2x5</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x5 Right Angle Male Headers</h3>
tDocu shows pin location.
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x5 Right Angle Female Header</h3>
Silk outline of pins
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x5 Shrouded Header</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x5 Shrouded Header Locking Footprint</h3>
Holes are offset 0.005" from center, to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Surface Mount - 2x5 Shrouded Header</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x5 No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x5</h3>
Holes are 0.05".
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2x5 Shrouded Header No Silk</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>>NAME>VALUE1>NAME>VALUE>NAME>NAME<h3>10 Pin Connection</h3>
5x2 pin layout>VALUE>NAME>NAME>VALUE>Name12<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<h3>For AVR SPI programming port, see special device with nice symbol: "AVR_SPI_PROG_5x2.dev"</h3>
<p></p>
<b>You can populate with any combo of single row headers, but if you'd like an exact match, check these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/778"> 2x5 AVR ICSP Male Header</a> (PRT-00778)</li>
<li><a href="https://www.sparkfun.com/products/8506"> 2x5 Pin Shrouded Header</a> (PRT-08506)</li>
</ul>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b>Special note: the shrouded connector mates well with our 5x2 ribbon cables:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/8535"> 2x5 Pin IDC Ribbon Cable</a> (PRT-08535)</li>
</ul>3.5mm terminal block, 2 positions ED555-2DS as found in the fablab inventory.
<p>Stolen from <a href="http://www.ladyada.net/library/pcb/eaglelibrary.html">Adafruit</a>, adapted by Zaerc.<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b>ENMS1MS2MS3RSTSTEPDIRVmotGND2B2A1A1BVDDGNDSLPGNDEnable (inverted)MS1MS2MS3Reset (inverted)Sleep (inverted)StepDirVDDVmotGND2B2A1A1BA4988 Carrier
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.