**>NAME>VALUERefDesType<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b>>NAME1>NAME>VALUE1>NAME>VALUE<b>PIN HEADER</b>>NAME>VALUE1<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216>NAME>VALUE>NAME>VALUE>Value>Name>Name>Value>Name>Value(Black)(Green)>NAME>VALUE>NAME>VALUE>NAME>VALUEMISOSCKRSTVCCMOSIGND>NAME>VALUE>NAME>VALUEUSB>Name>Value<b>Resistor (US Symbol)</b>
<p>
Variants with postfix FAB are widened to allow the routing of internal tracesSMD micro USB connector as found in the fablab inventory.
Three footprint variants included:
<ol>
<li> original, as described by manufacturer's datasheet
<li> for milling with the 1/100" bit
<li> for milling with the 1/64" bit
</ol>
<p>Made by Zaerc.
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.