For me this activity is totally new, and for this, I decided to use one of the examples of the hello board; I selected the asynchronous.
I changed a some distances on the board to hace more space to welding. I used a endmill 1/64″ for the circuit and 1/16″ to cut the borders;
base_ txt
connections:
programming the board:
To program the board I used the bootloader with Arduino as ISP with the same process that I made for the RGB board (w11) and for the first hello board ( w7), bootloading the bridge and the nodes.
then I run the Blink with 2 for the bridge, 3 for the first node and 4 for the second node.
I think that network is very powerful, and I have to do more experiments to learn more … but I’m just starting … at first my network was not working, then just a node … finally it works!
Files: