FAB ACADEMY 2015 Paul K. Rutto

Go Back Home

In this week assignment i designed my project with rhino CAD.Am new to rhino so i had to read several tutorials about rhino and also seeking assistance from the instructor or fab lab staff who understand the same, from there i tried independently to use it and i managed to make a design.I navigated through the tools in my drawing by clicking and selecting shapes or objects i want or by typing them on the command and choosing where to place on the sheet.I chose to work with no units in the drawing of rectangles.

Below is the drawing of a block diagram of my final project ( a standalone alarm).Fuctionality of the alarm system: Once the motion sensor detects a signal is fed into the processor which process it and power a speaker and generate a siren tone similar to the police siren.

Below is the rendering of the above block diagram.I learn rendering as explained above

Here is the design of my final project ( Stand alone alarm).The discase below will house what is in the block diagram above, those are electronics components which i anticipate to fabricate later in the cause of the semester.

Find below the first design of my project,a standalone alarm.

Download CAD file

The second design of the project with an opening and its cover.The CAD file is downable below, just below the design at the corner.