FAB ACADEMY 2015-Paul Rutto 
FAB ACADEMY 2015-Paul Rutto This week's assignment we had group project.Our project is about a 3D printer.We design and fabricated the body with shopbot
We assembled below machine, the machine is in Y and Z axis
Down more info here : http://fabacademy.org/achives/2015/af/labs/nairobi/mechanical&machinedesign.html
We 3D printed the bearing that holds the movable parts (the central part on the rail below)
We design and made electronics parts which are needed in automating our printer as shown
The PCB as per below diagram
The h-bridge PCB shown below this is for the drivers for the stepper motor
circuit development shown below.
I contributed in software applicatiosn , we installed the necessary software downloaded on the PC, then we connected our printer to the PC tested working ok.
.