The Printing
                                 & Scanning

       -I used rhino as 3d modeling tool to design this 3d. its a repetitive unit in sequence to be printed at the powder printing machine
     while modeling DON'T FORGET to Boolean all your objects to union them all together, so as the machine can read them all as one, not
as separated 3d shapes. in case of mesh or surface design, it has to be well closed without any open edges so as the machine can
consider it a surface, otherwise it wont get printed



                                              
The printer took more than 6 hours and when the object was out it was almost a block of powder, i had to blow the extra powder
carefully from the object with the air gun at the cleaning machine
The design here was challenging as it was small in scale and fragile in the membrane, so i had to move slowly with the air gun
through the holes in the model to remove the powder completely from it
then came the final stage where i added glue up on the final object to protect the powder from decaying and give it more strength