1. Downloaded AutoCAD and Solidworks; am starting to learn them.
2. Continued design of a press-fit bookshelf in Inkscape.
3. Tested a couple of laser cuts for vertical and horizontal bookshelf elements using the Epilog laser cutter and 1/4" plywood.
4. Plywood does not cut all the way through due to high density, especially on vertical elements. Finishing with a box cutter causes damage to thinner elements.
5. Will be attempting with new plywood (5mm oak.)
6. Learned Google Sketchup from Scott Rocca.
7. Sketched my final project in Google Sketchup.
8. Created video using Screencast-o-Matic free browser-based screen capture software.
9. Uploaded video on YouTube.