For this assignment I decide to use TINY45 for designing the schematic and board as I had to use only few components to complete this project.

 

Here is the list of the components used in building this circuit:

#TINY45

#BUTTON/SWITCH

#2LEDS

#1(10K) FOR RESETING THE CHIP

#2(100OHMS/1K) FOR THE RESISTANCE ON THE LEDS AND PROTECTION FOR LEDS

#5V-REGULATOR

#1uf CAPACITOR

#1 CONNECTOR FOR POWER

#1 CONNECTOR FOR PROGRAMMING

 

I DESIGNED MY BOARD USING EAGLE VISION 5.9.0

 

 

 

HERE IS THE BOARD READY TO BE PROGRAMMED AND WORK

 

WELL IM NOT GOOD AT SOLDERING BUT I KNOW THAT IT IS GOING TO WORK VERY WELL IT WONT DISAPOINT ME