In this assignment we are going to review the datasheets for safety and mixing instructions of molding and casting materials.
Here is the materials we have at our lab. Silicon rubber and epoxy.
The work area must be well ventilated.
Protective gloves and safety glasses must be used
If anything got spilled on hands, it must be washed very well
If it reached the eyes, it must be immediately washed, and a doctor must be consulted
It's a bad idea to smoke or eat while handling these materials
The package should be stored in a temperature less than 35°C
The mixing ratio for the silicon rubber is 1:10 meanwhile the mixing ratio for the epoxy is 1:3.
After that we had a machining tutorial to show the students how to setup the machine and how to use modella player 4 to generate the toolpath.