#include <CapacitiveSensor.h>

CapacitiveSensor   cs_7_8 = CapacitiveSensor(7,8); // 1M resistor between pins 4 & 8, pin 8 is sensor pin, add a wire and or foil




void setup()                    
{
   cs_7_8.set_CS_AutocaL_Millis(0xFFFFFFFF);// turn off autocalibrate on channel 1 - just as an example
   Serial.begin(9600);
   pinMode(10,OUTPUT);
}

void loop()                    
{

  short etapa = 0;

  
 long sensor1 =  cs_7_8.capacitiveSensor(50);

 
   Serial.println(sensor1);  // print sensor output 
  


 
   if(sensor1 >= 1000)
   {
    digitalWrite(10,HIGH);
    delay(100);
    digitalWrite(10,LOW);
    delay(100);
    etapa = 1;
   }
   else{
    digitalWrite(10,HIGH);
   }  
}