// Mayra Ascencio Calderón
 // Fab Academy
 // Code

const int sensor = 10;
const int led1 = 8;
const int motor = 2;
int sl;

const int pinservo1=1;

void setup() {
  
    pinMode (sensor, INPUT);
    pinMode (led1, OUTPUT);
    pinMode (motor, OUTPUT);
    
}

void loop() {
  
    sl= digitalRead(sensor);

    if (sl==1)
    {digitalWrite (led1,HIGH);
     digitalWrite (motor,HIGH);
     
  }
    else
  {
     digitalWrite(led1,LOW);
     digitalWrite(motor,LOW);
  }

     delay(20);

     }