/**
 * code secondary
 */
 
int boardID = 3; //change the number depending on the board
int blueLEDoff = 30;
int greenLEDoff = 20;
int redLEDoff = 10;

int blueLEDon = 31;
int greenLEDon = 21;
int redLEDon = 11;

void setup(){
  Serial2.begin(115200);
  pinMode(2, OUTPUT); //red
  pinMode(14, OUTPUT); //greeb
  pinMode(15, OUTPUT); //blue
      digitalWrite(14, HIGH);
      delay(1000);
      digitalWrite(14, LOW);

      digitalWrite(2, HIGH);
      delay(1000);
      digitalWrite(2, LOW);

      digitalWrite(15, HIGH);
      delay(1000);
      digitalWrite(15, LOW);
}

void loop(){
  int i = 0;
  if(Serial2.available()){
    i = Serial2.parseInt();
  }
  if(i != 0){
    if (i == greenLEDon){
      digitalWrite(14, HIGH);
    }
    else if (i == greenLEDoff){
      digitalWrite(14, LOW);
    }
    else if (i == redLEDon){
      digitalWrite(2, HIGH);
    }
    else if (i == redLEDoff){
      digitalWrite(2, LOW);
    }
    else if (i == blueLEDon){
      digitalWrite(15, HIGH);
    }
    else if (i == blueLEDoff){
      digitalWrite(15, LOW);
    }
  }  
}