#include <SoftwareSerial.h>
SoftwareSerial mySerial(0, 1);

boolean state = false;
void setup() {

  pinMode(7, OUTPUT);   //Set pin as an output
  mySerial.begin(9600);   //Start serial communication @9600 bps

}

void loop() {

  if (mySerial.available()) {

    char val = mySerial.read();

    if (val == 't') {    
      if (state == false) {
        state = true;
        digitalWrite(7, HIGH); 
      } else {
        state = false;
        digitalWrite(7, LOW ); 
      }
    }

  }
}