Group  Assignment

Computer-Controlled Cutting

Full Spectrum Laser

So, we have here Full Spectrum laser cutter, Hobby Series, 5th generation, and the software called :RetinaEngrave it’s free and easy to use software

This laser cutter has a 40W power laser and we usally use it to cut cardboard, wood, acrylic and other things from time to time. it has a working space of 500mm to 300mm, the focus of the machine is done manually by moving the laser head toward or far from the working area.

Focus

The focus of this machine done manually by undoing the screw and move the head to keep 0.8 cm from the material approximately. 

Power & Speed and other specs

The laser tube can produce 40 W of power that can cut these materials in the following sittings:

All these numbers came with us in the lap after many many hours of use for this laser cutter, of course while using this machine it will need a lot for maintenance and cleaning especially for the lencess...so after using it for a week(approximately) without cleaning , you may need to increase the power or lower the speed.. because not all the power of laser is converted to the cutting lense in the end

Keep in touch