// 
//   FILE:  dht11_test1.pde
// PURPOSE: DHT11 library test sketch for Arduino
//


#include <SoftwareSerial.h>
#include <dht11.h>
int pirPin = 7;                 // PIR Out pin 
int pirStat = 0;                   // PIR status
//variables del PIR
int actividad = LOW;

dht11 DHT11;

#define DHT11PIN 1
SoftwareSerial mySerial(6,5);
void setup()
{
  mySerial.begin(4800);
  int pirPin = 7;                 // PIR Out pin 
int pirStat = 0;                   // PIR status
//variables del PIR
int actividad = LOW;
}

void loop()
{
  pirStat = digitalRead(pirPin); 
 if (pirStat == HIGH) {            // if motion detected
   //digitalWrite(ledPin, HIGH);  // turn LED ON
   mySerial.println("Hey I got you!!!"); 
  actividad = HIGH;
  int chk = DHT11.read(DHT11PIN);


  mySerial.print("Tem: ");
  mySerial.println((int)DHT11.temperature  );

 }
 else {
  mySerial.println("off");
  if (actividad == HIGH) {
    mySerial.println("no motion");
    actividad=LOW;
  }
 // mySerial.println(digitalRead(pirPin));
}
  
  delay(2000);
}
//
// END OF FILE
//