#include <SoftwareSerial.h>
   SoftwareSerial BTSerial(9, 8); // RX | TX
   
   
   char c=' ';
   boolean NL = true;
   
   void setup() 
   {
       Serial.begin(9600);
       Serial.println("Sketch HC-0x_FC-114_01_9600");
       Serial.println("Arduino with HC-0x FC-114 is ready");
       Serial.println("Make sure Both NL & CR are set");
       Serial.println("");
       
       // FC-114 default baud rate is 9600
       BTSerial.begin(9600);  
       Serial.println("BTserial started at 9600");
       Serial.println("");
       
   }
   
   void loop() 
   {
       
       // Read from the Bluetooth module and send to the Arduino Serial Monitor
       if (BTSerial.available())
       {
           c = BTSerial.read();
           Serial.write(c);
       }
       
       
       // Read from the Serial Monitor and send to the Bluetooth module
       if (Serial.available())
       {
           c = Serial.read();
           BTSerial.write(c);   
           
           // Echo the user input to the main window. The "phone ->" character indicates the user entered text.
           if (NL) { Serial.print("phone ->");  NL = false; }
           Serial.write(c);
           if (c==10) { NL = true; }
       }
       
   }
}