---

Assembling the whole thing

watering the humidifier

First of all, I had to design something that can make the previous design work for me.
And as I said previously I designed a tube with holes that I put in the water tank and filled it with cotton to absorb more water for the humidifier to work.
A matter of fact, normally humidifiers work with cotton sticks that can be purchased online
but since I couldn't find them here in Tunisia

I decided to refill my tube with normal cotton, and it needs a lot of patience and little of water to make it work.

Since the atomizer wires are directly linked to the water tank, so I had a big time problems, in how to pour water, and to link it to its module board since the base was kinda narrow

So after I fixed everything, and put everything in its place and turning off the lights
the moment of truth came
"crying a river"

The challenges

First of all, I had quite challenges when I started to assemble the whole thing

Disoldering of the wires

I suffered quite a lot while trying to do all the wiring especially with the soldered wires on the Led ring, or the atomizer so >I had to put some hot glue on the surface of the soldered wires.

My neopixel ring got damaged after so much soldering, so I had to buy a new one, that changed alot of plans because of its bigger dimensions, therefore I made another holder to fit in it.

Stuffed wires

Therefore, I made some sort of a box to hold the main board and I tried to keep everything in order and then glue them using a tape.

---

Files
interior body of the design
exteriorbody of the design

---