/*
  Blink (modified slightly for ATTiny84/44 ICs
  Turns on an LED on for one second, then off for one second, repeatedly.

  This example code is in the public domain.
 */

// ATTIny84 / 44 does not have Pin 13, so we use pin 7 instead.
// A current limiting resistor should be connected in line with the LED.
int led = 7;

// the setup routine runs once when you press reset:
void setup() {
  // initialize the digital pin as an output.
  pinMode(led, OUTPUT);
}

// the loop routine runs over and over again forever:
void loop() {
  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);               // wait for a second
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(100);               // wait for a second
}