/* HC-06 Config */

// Serial communication on pins 2 and 3
#include <SoftwareSerial.h>                                
SoftwareSerial HC06(2, 3);           // RX, TX

void setup()  
{ 
HC06.begin(9600);                                                 // Bluetooth serial connection initialization @ 9600 bauds
Serial.begin(9600);                                               // serial connection initialization @ 9600 bauds
Serial.println("Entrer la commande AT:");
} 

void loop(){  
 // if HC-06 transmit, write message
 if (HC06.available())                  
 {
 Serial.write(HC06.read());
 }
 // when data is written in serial monitor send it to HC-06
 if (Serial.available())
 {
 HC06.write(Serial.read());
 }   
}