6. Scanning and printing
- Basic info of the equipments
Machine i was using was
Brand: CREALITY
Model: Ender-3S
Max printing dimension: 250mmx250mmx250mm
The material in the lab we have PLA
Wait until the drill is 200 degree and heated bed 50 degree and start printing.
- Design Rules of the printer
Wall thickness|Clearances|angles|overhangs|bridging|support
I used Fusion360 to make a board to test how thin a wall can be and how narrow a rip can be. Set the thicknesses and widths shown as below sketch.
Turns out the machine that i'm going to use will be able to print at least 1mm.