'SHOPBOT FILE IN MM
IF %(25)=0 THEN GOTO UNIT_ERROR	'check to see software is set to standard
C#,90				 	'Lookup offset values
'
'
'Turning router ON
SO,1,1
PAUSE,2
'
'Toolpath Name = cutout
'Tool Name   = End Mill (5 mm) test
MS,49.8,39.8
JZ,20.000000
J3,2.123044,5.810811,6.000000
M3,2.123044,5.810811,-2.700000
M3,2.123044,47.366997,-2.700000
M3,2.123044,56.366997,-2.700000
M3,2.123044,90.810814,-2.700000
M3,47.123043,90.810814,-2.700000
M3,47.123043,82.803696,-2.700000
M3,47.123043,73.803696,-2.700000
M3,47.123043,32.810810,-2.700000
M3,47.123043,23.810810,-2.700000
M3,47.123043,5.810811,-2.700000
M3,2.123044,5.810811,-2.700000
M3,2.123044,5.810811,-5.400000
M3,2.123044,47.366997,-5.400000
M3,2.123044,56.366997,-5.400000
M3,2.123044,90.810814,-5.400000
M3,47.123043,90.810814,-5.400000
M3,47.123043,82.803696,-5.400000
M3,47.123043,73.803696,-5.400000
M3,47.123043,32.810810,-5.400000
M3,47.123043,23.810810,-5.400000
M3,47.123043,5.810811,-5.400000
M3,2.123044,5.810811,-5.400000
M3,2.123044,5.810811,-8.100000
M3,2.123044,47.366997,-8.100000
M3,2.123044,56.366997,-8.100000
M3,2.123044,90.810814,-8.100000
M3,47.123043,90.810814,-8.100000
M3,47.123043,82.803696,-8.100000
M3,47.123043,73.803696,-8.100000
M3,47.123043,32.810810,-8.100000
M3,47.123043,23.810810,-8.100000
M3,47.123043,5.810811,-8.100000
M3,2.123044,5.810811,-8.100000
M3,2.123044,5.810811,-10.800000
M3,2.123044,47.366997,-10.800000
M3,2.123044,56.366997,-10.800000
M3,2.123044,90.810814,-10.800000
M3,47.123043,90.810814,-10.800000
M3,47.123043,82.803696,-10.800000
M3,47.123043,73.803696,-10.800000
M3,47.123043,32.810810,-10.800000
M3,47.123043,23.810810,-10.800000
M3,47.123043,5.810811,-10.800000
M3,2.123044,5.810811,-10.800000
M3,2.123044,5.810811,-13.500000
M3,2.123044,47.366997,-13.500000
M3,2.123044,47.366997,-13.200001
M3,2.123044,56.366997,-13.200001
M3,2.123044,56.366997,-13.500000
M3,2.123044,90.810814,-13.500000
M3,47.123043,90.810814,-13.500000
M3,47.123043,82.803696,-13.500000
M3,47.123043,82.803696,-13.200001
M3,47.123043,73.803696,-13.200001
M3,47.123043,73.803696,-13.500000
M3,47.123043,32.810810,-13.500000
M3,47.123043,32.810810,-13.200001
M3,47.123043,23.810810,-13.200001
M3,47.123043,23.810810,-13.500000
M3,47.123043,5.810811,-13.500000
M3,2.123044,5.810811,-13.500000
M3,2.123044,5.810811,-16.200001
M3,2.123044,47.366997,-16.200001
M3,2.123044,47.366997,-13.200001
M3,2.123044,56.366997,-13.200001
M3,2.123044,56.366997,-16.200001
M3,2.123044,90.810814,-16.200001
M3,47.123043,90.810814,-16.200001
M3,47.123043,82.803696,-16.200001
M3,47.123043,82.803696,-13.200001
M3,47.123043,73.803696,-13.200001
M3,47.123043,73.803696,-16.200001
M3,47.123043,32.810810,-16.200001
M3,47.123043,32.810810,-13.200001
M3,47.123043,23.810810,-13.200001
M3,47.123043,23.810810,-16.200001
M3,47.123043,5.810811,-16.200001
M3,2.123044,5.810811,-16.200001
J3,2.123044,5.810811,6.000000
JZ,20.000000
J2,0.000000,0.000000
END
'
UNIT_ERROR:
C#,91					'Run file explaining unit error
END