3. Computer Aided design¶
Assignments for the week¶
- Model a possible final project, and post it on your class page.
Requirements¶
- Modelled experimental objects/part of a possible project in 2D and 3D software.
- Shown how you did it with words/images/screenshots.
- Included your original design files.
Softweres¶
Try some softwere¶
Raster: Paint vs GIMP¶
Paint is a simple build-in softwere of windows.
GIMP is more like Photoshop, which has layers, curve, etc.
But the new layer in GIMP will be gray, and I didn’t find how to make It colors, maybe I will try sometimes.
Update at week 11: When I install it out of Sandboxie, It works fine.
Screen shot of GIMP.
And Paint.
Vector: Inkscape vs Rhinoceros¶
Inkscape is relly like Coreldraw and Illustrator. It’s not easy to make some lines on another shape’s tip or middle (or I didn’t found It). Inkscape is good as a art softwere, but this week I need CAD softwere.
Screen shot of Inkscape.
FreeCAD¶
Documents and tutorials for use os spreadsheet:
Swich interface to your language.
Call spreadsheet out
Edit the spreadsheet
You cannot edit (drag, copy, paste, etc.) spreadsheet like you do it in spreadsheet softweres. A better way is edit it in a spreadsheet softwere like Excel or OpenDocument,then import to OpenCAD.
However, the data in CSV file exports from FreeCAD is separate by “Tab”, not comma. But OpenDocument does It by comma. So you need to open the CSV by an txt editer, type a “Tab”,copy it, and use the “search and replace” functio to replace all comma by tab.
Then FreeCAD can read It right.
Setup “Alias” one by one.
Go to workbench “sketcher”, creat a new sketch, link it to spreadsheet.
I still can’t fix the conflic of patameters. A double patameters cannot be delete. Maybe it only be a problem in Windows.
Fusion 360¶
For the problem on FreeCAD, I am tring swich to Fusion 360, but Fusion 360 has own problem. When I change the deepth of fitting, It change the angle as well, which should be still.
see week 4 for details (open in a new tab)
Possible final project draw by Rhinoceros.¶
updated 6.19.2019
Following drawing is the idea of my possible final project.
Finally I use a softwere I knew.
It’s easy to locating between draws.
Frist, draw a 2D sketch.
My project needs a narrow channel.
Then grows to 3D model.
Recognising surfaces will be an issue when drawing 3D.
Done.
STP files is much small then STL files.
Files:¶
Try some softwere.¶
Possible final project.¶
updated 6.19.2019
Idea.jpg
2D Sketch for micro-fluid channel
3D model (.STP) for final project
Links¶
Parameter I/O –An app for Fusion 360
Fusion 360: Patterns & User Parameters
Rhinoceros site