use <lasercut.scad>; $fn=60; 
 projection(cut = false) 

lasercutout(thickness = 3.2, 
          points = [[0, 0], [100, 0], [100, 75], [0, 75], [0, 0]]
        , simple_tab_holes = [[360, 23.45, 37.5], [360, 73.45, 37.5]]
        , captive_nuts = [[0, 50, 75]]
        , twist_holes = [[270, 50, 18.75, 37.5]]
        ) 



lasercutout(thickness = 3.2, 
          points = [[0, 0], [93.8, 0], [93.8, 193.8], [0, 193.8], [0, 0]]
        , simple_tabs = [[180, -1.55, 0], [180, -1.55, 196.9], [270, 93.8, -1.55]]
        , captive_nut_holes = [[0, 50, 193.8], [180, 50, 0]]
        , finger_joints = [[0, 1, 4], [180, 1, 4], [90, 1, 4], [270, 0, 4]]
        , flat_adjust = [105, -203]
        ) 


;