Wildcard -Composite
Goal of the week
individual assignment:
-read the safety data sheet (SDS) and technical data sheet (TDS) for the resins that you're using -design and fabricate a 3D mold (~ft2) and produce a fiber composite part in it,with resin infusion and compaction
individual work
I've decided to do a jar for the plants: first of all I've designed with Onshape:
Composition of my object
The first step to do is the milling of the polystyrene mold: I have had to done two mold slicing the whole object because it is higher than the thickness material: the toolpath of the milling is very similar than the molding and casting one; a small difference is in the setting of the roughing and finishing tips : this is the two setting different for the 1/4 and 1/8 tip:
IMG_6162 from Marco Cialone on Vimeo.
after the milling I have two part that I have to fix together:
The second process is to put a polyvinyl release agent in order to manage to remove the final object from the mold:
To use it in the correct way I've read the datasheet
after this process I am going to do this step to have the final object
so then I've cut the yuta and prepared the resin A and B with the proportion 100g(A)-30g(B) like I've seen in the datasheetof the material(this datasheet is completely in italian because the supplier is italian):
when I've done every strate I've put the object in the vacuum bag:
after a day I've remove every strate from my object and the resul is this: