Mechanical design

Week assignement

Work individual(and group)

In this week I am going to design my machine; I work alone so I have had to work hard and with much organitation. The machine I've designed is a compressor tester: the structure of it and the information about it are visibile in this site where I've taken inspiration. The main mechanic structure of this system is the rack and pinion: about this I' ve search in this site[https://github.com/fellesverkstedet/fabricatable-machines/tree/master/chamferrail ] how it work so I've started to design (and print) the rack and pinion and from these I've build the whole structure.

My rack and pinion

Before of all I have tried to build the rack and pinion separately and then I have tried to simulate the working of the system:

in the base of the rack I've done 4 holes for the screws because I am going to put it on 3 block of wood to have it lifted up because the pinion has to slide on a bar

the pinion structure is the complementary of the rack :

we also can see the circular and rectangular holes: in the circular one I have to put the spindle of the motor and from the rectangular one I am going to put the hexagonal junction of the screws in order to stop the pinion around the spindle.

The slide of the motor

In my system the rack is fixed and my pinion linked to the motor flows through the "sled". In this sled I have done a place where I've put the motor and I have fixed it with 2 screws . I've also than a space for the screws of the compressor block. And finally I have done up and done two slot for the linear bearings (so the bar )

The assembly

In the assembly of the project I've simulated the machine joining every component : in this way I have the certainty that the system component are perfectly joinable.

So at the end when I have finished the design I have printed every componenet and I have assemblied it.

To see the week of mechanic and machine togheter go to the link of the machine