<b>ST Microelectronics Devices</b><p> Microcontrollers, I2C components, linear devices<p> http://www.st.com<p> <i>Include st-microelectronics-2.lbr, st-microelectronics-3.lbr.<p></i> <author>Created by librarian@cadsoft.de</author> <b>Dual In Line Package</b> >NAME >VALUE Dual In Line Package <b>Pin Header Connectors</b><p> <author>Created by librarian@cadsoft.de</author> <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE PIN HEADER PIN HEADER <b>OMRON SWITCH</b> >NAME >VALUE 1 2 3 4 >NAME >VALUE <b>EAGLE Modela Design Rules</b> <p> These design rules can be used to check whether the Modela will be able to correctly mill your board. <p> Primary Rules:<br> Min. clearance = 0.397mm (1/64in) <br> Min. trace width = 0.03mm Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.