Skip to content

3D Scanning

As a fabmanager, I use 3D scanning since 2013 with different kind of technic such as :

  • With a kinect or PrimeSense a and the soft Skanect
  • With DIY laser scanner
  • Wit David Laser scanner
PrimeSense Kinect David Laser Scanner

But, there is a technic I’ve never use, It’s photogrammetry. So for this week I decided to test some photogrammetry software.

My model

To test the softwares, I used a series of photos of a stuffed toy belonging to my daughter 😄 . To take the photos, I used my canon 80D Reflex and put my lens on 50mm.

The model The camera The parameters of the camera

Tip

To take the different pictures of the model, I’ve never change the parameters of the lens ( 50mm ) and I use my reflex in manual mode. I set my device at the beginning of the shooting session and never change it. I also use a cobra flash not oriented directly onto the model to avoid reflexion and to have a similar and soft light on the model.

AliceVision

AliceVision is a free and opensource photogrammetric software.

To install it I followed [this link on the github project of AliceVision.](https://github.com/alicevision/meshroom.

But after reading it, I discover that it will not work for me because, on a Mac, it need a dedicated nVidia GPU. And as I have a MacBook pro with an intel iris GPU, it will not be possible to build the sources.

OpenMVG

I also try OpenMVG but not able to install it on my Mac.

Regard3D

I succeed in installing Regard3D. I launch it and put my pictures into the software.

The software Import menu My pictures imported
Step 1 Step 2 Finish soon …

But after 52 min, I’ve got nothing and the software tell me that 0 matches were found … I decided to try another software before re-trying Regard3D

MetashapePro

MetashapePro is a commercial software. You can use a basic or a pro version. There is a trial version for 30 days. The basic version is affordable ( 179$ ) but the pro is … well … it’s a pro version 😄 3 499$ …

I took the trials on the pro version, launch the software, import the picture and try the tool alignment tool … And it took me 6h on my little mac …

The software Importing my pictures 6 hours of work …

But the result of the cloud point is impressive :

So, as it woks pretty well, I decided to build a model using this cloud point… And let’s go for 15 hours of work 😢.

The software Importing my pictures 6 hours of work …

And the result is very impressive :

Source file