18. Wildcard week


Individual assignment


This week i wanted to do something different , and i choose fo embroidery

I am going to work with Inkscape and with plugin called Inkstitch

I went to the Inkstitch website www.inkstitch.org

In the menu i went to the installation link, and followed the download link to github. And i downloaded the file i needed for a windows environment

I followed the install steps as described in the tutorial on Inkstitch.org
And i put the plugin folder into the install folder of Inkscape

After That i loaded my Probitas logo design into Inkscape and did a bit tracemap And removed the old file

And went to the Tab “extensions” and choose the Inkstitch plugin

When this is opened up, you will get the first Tab “Stroke” here you can configure several thing, all about the stiches.

In the preview screen you can see your result and then adjust some parameters Or if youre happy go save your file

When you save your file it wil have the PES extension this it the Brother embroidery format that the Brother machine uses. i choosed a folder and then saved it to an USB harddrive

After the design is done , i had to setup the machine, we used a Brother You can use it as an normal sewing machine

But i want to go embroider, so i have to make some changes. - the bed has to become bigger - there will be a special frame slide into the bed.

This is the end result and the machine is ready for embroidery

Next step is to get your cloth in my case a handkerchief ready into the special frame, there is a limit in how big the design can be. You have to use a another cloth on the back especially if your fabric is to thin

When your cloth is fixed on the special frame you can start the process

The machine is turned on , and it boots up

During the boot then machine will give a warning because it will move certain things like the foot with the needle.

There are several feet you can use, for this embroidery I use the U foot.

With this buttons you can configure the machine

The file for the design was on an USB stick, the machine recognizes the file And loads it in to the machine UI

Here I could change the speed but also the number of stiches

Then I centered my design exactly in the middle of my handkerchief and press OK

The process started, overall it would take 30 minutes.

After this handkerchief was finished I started another

I tried a green one now, with another color of thread

After a while it can happen that the bobbin will get empty and you’ll have to stop the process to fix this. The bobbin holds the thread that is at the under of the working area After filling up the bobbin you can start the machine again, the process will start at the excact point where it stopped.

The machine starts again and finish the process

I loved the embroidery I had never done this and I can not wait to make some more designs and embroider hats, shirts or jackets

Video of the Brother embroidery in Action

Downloads

Probitaslogo

Brother embroidery file