Week#0

This is the starting week of the Deploma in Fablab.
In this week we have to decide our project Idea and start working on the development of the website, so I start working on final project.
I am very curious about modern parking systems and smart parking system, its really attracts me. So for i was motivated to make a smart parking system and I decided to make a modern rotary car parking system. So I start searhing about differtent modern parking systems.
But the issue is this would be just a prototype not will be in working system.The rough sketch of the smart parking is shown in the following photos.

You can also check some more INTELLIGENT PARKING SYSTEM HERE and HERE.

I was much interesting,but the issue was this would be just a prototype not will be in working system.The rough sketch of the smart parking is shown in photos.
This project will be not in the complete working scale so for i did skip this project and move on the other project.Now i have selected the levitating clock project.The rough sketch of the final project is shown below.

I was aslo curious and find it an interesting project but the issue is the magnetic levitation module is not available here and if I make order from forign it will exceed the project cost limit and will aslo expensive for me.

So once again I start searching and looking for new project Idea and I find and interesting thing A Wire Bending machine, a machine that will bend wire according to our input criteria so we can make different wire bended products of same size with precesion.

Now I have completely decided to continue the Wire Bending Machine and its my final project, a machine that will bend the wire according to our input design. The machine will be capable to bend wire X,Y and Z-axis. In market there are some brands that are manufacturing wire bending machines. D.I wire is one of those brands( Pensa labs). They are making wire bending machine for the table top.

This is just an example, it is a big wire bending machine for large and long wire length. I will make on small scale for small length of wire.
In this wire bending project there is great learning,I am a Mechatronics engineer so it really looks atractive to me, because its include the mechanical, electronics and aslo computiing side.