18. Wildcard#
- Author :Jun Kawahara (FabLab Kamakura)
- Date created : 05/23/2019
- modified: 05/25/2019 (Kai Naito)
Class site#
Class video#
授業内容まとめ#
Assignments & Goal#
Refer to Assessment page
:confused: Not yet updated for 2019 evaluation standards
Design and produce something with a digital fabrication process (incorporating computer-aided design and manufacturing) not covered in another assignment, documenting the requirements that your assignment meets, and including everything necessary to reproduce it. Possibilities include (but are not limited to) composites, textiles, biotechnology, robotics, folding, and cooking.
Learning outcomes:#
- Demonstrate workflows used in the chosen process
- Select and apply suitable materials and processes to create your project.
Have you:#
- Shown how you made your project
- Described problems and how you fixed them
- Included your design files and ‘hero shot’ photos of the project
FAQ:#
Can I make the assignment by hand?#
Answer: Although there can be manual processing steps, to count as digital fabrication the workflow should pass through design in a computer and some kind of automated output process. So programming the embroidery of circuits would count, but hand-stitching them wouldn’t.
補足:#
-
Notes on assignment
- Process should involve computer-aided design and manufacturing.
- You cannot use the same technique that was covered in previous lectures.
-
composite
- Material
- 手積用 ポリエステル樹脂 (Polyester resin)
- ポリエステル硬化剤(Curing agent for polyester resin)
- ジュート(麻布) Jute
- Bring other fibers for trial
- class page
- read the safety data sheet (SDS) and technical data sheet (TDS) for the resins that you’re using
- produce test coupons for your composite fabrication process(es)
- design and fabricate a 3D mold (~ft2) and produce a fiber composite part in it, with resin infusion and compaction
- group assignment - FabLab Kamakura 2018
- Material
-
textile
-
soft robotics
- Soft robotics - Fabricademy 2018-2019
- Soft Robotic Grippers - Adv. Mater.
- I love Montserrat(Dassault 3D Experience LAB)’s work
- Computerized embroidery
-
連絡事項 Announcements#
-
final projects
- https://finalprojects.fabacademy.org/#/schedule/2019
- instructions
- /presentation.png: 1920x1080
- /presentation.mp4: 1920x1080 HTML5
-
schedule
- deviations
- Wed June 5 -> Thu June 6 (Eid al-Fitr, イド・アル=フィトル)
- deviations
-
Recitaion: May 27 events: Dina
- FAB14: Romain di Vozzo
- FAB15: Dina El-Zanfaly
- FAB16: Monique Chartrand
- FAB17: Tsewang
- FAN: Saverio
- Fab Festival: Adel++
- Nordic: Frosti
- Arab: Dina
- platform, serving, apps: Fiore
-
Asia Regional Review:
- on Tuesday 13:00-14:00 JST or 22:00-23:00 JST
- video conference for meetings:
link
-
Class on Wednesday 9:00 EST, 23:00 JST