Skip to content

5. Electronics production

This week I worked on making in-circuit programmer by milling the PCB program it, then optionally try other PCB processes

Assignment

  • Make an in-circuit programmer by milling the PCB.

Group Assignment

  • Characterize the design rules for your PCB production process

Machine

Roland MonoFab SRM-20

After solder the USB to the board for the first time

For the ISP board the equipments i used for this are as follows:

  • Solder
  • Solder station
  • Fume extractor
  • Electric solder gun
  • Braid
  • Solder sucker

After 2 hours of hard work I came up with this simple but fantastic ISP board !

Video

Code Example

There were some problem what I was facing to inslall the program in my IC.Here is One Example of it.

When I got to install the program in my IC it showed something like this

Here the board was running succesfully

Thank You ! Lot To Come Yet !