<b>CAPACITOR</b>>NAME>VALUE>NAME>VALUE<b>Small Outline Transistor</b>>VALUE>NAME<b>Small Outline Package</b>>NAME>VALUE<b>Dual In Line Package</b>>NAME>VALUE<b>HP-VFQFP-N20</b> Micro Lead Frame package (MLF)>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE>NAME>VALUE>NAME1>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216>NAME>VALUE1>NAME>VALUE<b>SOT 23</b>>NAME>VALUEmini-SMA diode>Name>ValueLED 1206 pads (standard pattern)>NAME>VALUELED1206 FAB style (smaller pads to allow trace between)>NAME>VALUE5mm round through hole part.>NAME>VALUE<b>SMALL OUTLINE TRANSISTOR</b><p>
TS-003>NAME>VALUE>VALUE>NAME>NAME>VALUE(Black)(Green)>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>ValueLED>NAME>VALUE>VALUE>NAMEGSD<b>Resistor (US Symbol)</b>
<p>
Variants with postfix FAB are widened to allow the routing of internal traces<b>PIN HEADER</b>Diode schottky 100V 1A mini-SMA as found in the fablab inventory
<ul>
<li>Reverse Voltage: 100 Volts
<li>Forward Current: 1.0 Amp
<li>Maximum forward voltage: 0.85 Volts
</ul>
<p>Made by Zaerc.LED<b>MOS FET</b><b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><b>Pin Header Connectors</b><p>
<author>Created by librarian@cadsoft.de</author><b>PIN HEADER</b>>NAME>VALUE<b>PIN HEADER</b>>NAME>VALUEPIN HEADERPIN HEADER>NAME>VALUE<b>PIN HEADER</b><b>Pin Header Connectors</b><p>
<author>Created by librarian@cadsoft.de</author><b>PIN HEADER</b> - 2.54>NAME>VALUE<b>PIN HEADER</b> - 2.54 90°>NAME>VALUE<b>PIN HEADER</b> - 2>NAME>VALUE<b>PIN HEADER</b> - 2.54 SMD>NAME>VALUE<b>PIN HEADER</b> - 2.54 90°>NAME>VALUE>NAME>VALUE<b>PIN HEADER</b>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.