Networking and Communications

Assignment

Class Week 13

In this week assignment we had to make at first our own Bluetooth device, which is shown in the Fabacademy schedule from week 13 (Fabmodule nRF52 - 2.4 GHz Bluetooth, ISCBM)

We started preparing PNGs from our board to be introduced to MODS, same as we did in week 4, and finally exported the RML document to be read by the milling machine.

After the milling my fab bluetooth device is ready to get soldered.

At least, after soldering all components, I checked the traces and wires. No sign of bad circuits, so far, so here is my final Fab Bluetooth PCB:

Networking with I2C

For this assignment we had to use our own PCBs, so I chose these two:

Fab PCB produced in week 6 - Electronics Design

Fab ISP produced in week 4 - Electronics Production