'----------------------------------------------------------------
'SHOPBOT ROUTER FILE IN MM
'GENERATED BY PARTWorks
'Minimum extent in X = 0.000 Minimum extent in Y = 0.000 Minimum extent in Z = -15.000
'Maximum extent in X = 1200.000 Maximum extent in Y = 1600.000 Maximum extent in Z = 0.000
'Length of material in X = 1200.000
'Length of material in Y = 1600.000
'Depth of material in Z = 15.000
'Home Position Information = Bottom Left Corner, Material Surface 
'Home X = 0.000000 Home Y = 0.000000 Home Z = 50.000000
'Rapid clearance gap or Safe Z = 50.000
'UNITS:MM
'
IF %(25)=0 THEN GOTO UNIT_ERROR	'check to see software is set to standard
SA                             	'Set program to absolute coordinate mode
CN, 90
'New Path
'Toolpath Name = Drill 1
'Tool Name   = Straight 6,0mm  (48-005)

&PWSafeZ = 50.000
&PWZorigin = Material Surface
&PWMaterial = 15.000
'&ToolName = "Straight 6,0mm  (48-005)"
&Tool =2                    'Jog Z axis to safe height
C9
TR,14000
C6                   'Return tool to home in x and y
PAUSE 2
'
MS,75.9,25.3
JZ,50.000000
J2,0.000000,0.000000
J3,404.032013,197.080002,50.000000
J3,404.032013,197.080002,6.000000
M3,404.032013,197.080002,-1.500000
J3,404.032013,197.080002,50.000000
J3,933.721985,199.722000,50.000000
J3,933.721985,199.722000,6.000000
M3,933.721985,199.722000,-1.500000
J3,933.721985,199.722000,50.000000
J3,737.961975,663.418030,50.000000
J3,737.961975,663.418030,6.000000
M3,737.961975,663.418030,-1.500000
J3,737.961975,663.418030,50.000000
J3,944.721985,834.322021,50.000000
J3,944.721985,834.322021,6.000000
M3,944.721985,834.322021,-1.500000
J3,944.721985,834.322021,50.000000
J3,313.273010,797.632019,50.000000
J3,313.273010,797.632019,6.000000
M3,313.273010,797.632019,-1.500000
J3,313.273010,797.632019,50.000000
JZ,50.000000
J2,0.000000,0.000000
'
'Turning router OFF
C7
END
'
'
UNIT_ERROR:
CN, 91                            'Run file explaining unit error
END