//Programa placa Display
//Incluir librerias liquid crystal I2C y Dallas Temperature
#include <Wire.h> 
#include <LiquidCrystal_I2C.h>
#include <DallasTemperature.h>
#include <OneWire.h>

#define Lector1 2

LiquidCrystal_I2C lcd(0x3F,20,4);
OneWire myWire(Lector1);
DallasTemperature sensors2(&myWire);

int pot = A3;
int lectura;
int temperatura;
float velocidad;
int digital = 11;

void setup() {
  // put your setup code here, to run once:
Serial.begin(9600);
pinMode(pot, INPUT);
sensors2.begin();
pinMode(2,HIGH);
lcd.init();
lcd.backlight();
lcd.setCursor(3,0);
lcd.print("FAB-Brewer");
}

void loop() {
sensors2.requestTemperatures();
temperatura = sensors2.getTempCByIndex(0);
lectura = analogRead(pot);
velocidad = map(lectura,0,1023,8,1);
lcd.setCursor(0,1);
lcd.print("T:");
lcd.setCursor(2,1);
lcd.print(temperatura);
lcd.setCursor(6,1);
lcd.print("Rate:");
lcd.setCursor(11,1);
lcd.print(velocidad);
lcd.setCursor(12,1);
lcd.print("dps");
Serial.println(temperatura);
if (temperatura <10)
{
  digitalWrite(digital,HIGH);
}


}