#include "SoftwareSerial.h"
const int MOTOR = 8;
const int LED = A2;  

const int FLEX = A7; // FLEXSENSOR

const int Rx = A0;  

const int Tx = A1; 

SoftwareSerial mySerial(Rx, Tx);

int val = 0; 

void setup(){

pinMode(LED, OUTPUT); 
pinMode(Rx, INPUT);
pinMode(MOTOR,OUTPUT);
pinMode(Tx, OUTPUT);

mySerial.begin(9600);

}

void loop()

{


delay(50);

val = analogRead(FLEX); // read the FLEXSENSOR

mySerial.println(val); // send the value to Serial Monitor, ^Cmd-M


if (val < 300)
  {
             digitalWrite(MOTOR,HIGH);
             digitalWrite(LED,HIGH);
             delay(1000);
  }                                 
else
{
  digitalWrite(MOTOR, LOW);
  digitalWrite(LED, LOW);

}

}