Wild Card

At first I chose to design a hilly part with slopes in solidworks then saved it as a .stl file that I imported in Vcarve then I set it and chose a roughing choice to cut it then I cut it with the CNC machine shopbot and came out as perfectly as it could.

Part designed in solidworks

Part designed in solidworks

.stl file in Vcarve

.stl file in Vcarve

Time taken to roughen it

Rough option done on stelloform done

cut option done

Whole part done cutting

Resin used to fortify

100 grams of Epoxy weighed without the weight of the cup(tolerated grams)

Sackcloth

sackcloth is joined to the with the mixed epox to make it harder

With this stelloform to use epox on the sackcloth different natural fibers and resins. For one piece I used sackcloth and for the other one linen. Both of them are joined using a polyester matrix.