Project Development
Work to be done
- Evalute the project plan
- Apply time managment techniques
- Summarise the essence of the project
what is the deadline?
The deadline for the project submission is on 11thJune, so I am left with less than 14 days to develop the whole project.
What task have been completed
So far the only thing I have done is sketching the final designs for different modules I will make for final project.
The remaining thing is to design and print the circuit and their enclosure I will use for the final project.
How will I complete the remaining task in time?
This is the list of the schedule I will follow to finish the project in time.
| Dates | Task scheduled |
|---|---|
| 4-June | Design and print PCB board for Motion detector and Door state detector. |
| 5-June | Design and Print PCB board for Glass break detector. |
| 6-June | Design and Print PCB board for Gateway device and program all devices. |
| 7-June | Design and 3D print enclosure for Motion detector and Door state detector. |
| 8-June | Design and 3D print enclosure for Glass break detector. |
| 9-June | Design and 3D print enclosures for Gateway device. |
What has worked
In the development of the project I was able to make the motion detector, door state detector and the gateway to work properly.
I have designed also the enclosure of the motion, glass break, and door state detectors.
What hasn't worked
I haven't been able to make the glass break detector working and because of time also I didn't design the encloser for gateway device.