Developed by element14 :<br>
element14 CAD Library consolidation.ulp
at 27/07/2012 14:02:49
*
*
*
*
>NAME
>VALUE
>NAME
>VALUE
8-bit Microcontroller with In-System Programmable Flash
1
>NAME
>VALUE
>NAME
LED 1206 pads (standard pattern)
>NAME
>VALUE
LED1206 FAB style (smaller pads to allow trace between)
>NAME
>VALUE
5mm round through hole part.
>NAME
>VALUE
>NAME
>VALUE
1
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
>NAME
>VALUE
<b>PIN HEADER</b>
>NAME
>VALUE
1
<b>CAPACITOR</b>
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216
>NAME
>VALUE
>NAME
>VALUE
>Value
>Name
>Name
>Value
>Name
>Value
<B>Wide Plastic Gull Wing Small Outline Package</B>
>NAME
>VALUE
(Black)
(Green)
LED
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
MISO
SCK
RST
VCC
MOSI
GND
>NAME
>VALUE
>NAME
>VALUE
USB
>Name
>Value
>NAME
ATtiny45
LED
<b>Resistor (US Symbol)</b>
<p>
Variants with postfix FAB are widened to allow the routing of internal traces
<b>PIN HEADER</b>
SMD micro USB connector as found in the fablab inventory.
Three footprint variants included:
<ol>
<li> original, as described by manufacturer's datasheet
<li> for milling with the 1/100" bit
<li> for milling with the 1/64" bit
</ol>
<p>Made by Zaerc.
<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>
>VALUE
>VALUE
<b>SUPPLY SYMBOL</b>
<b>SUPPLY SYMBOL</b>
<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>
>VALUE
>VALUE
>VALUE
>VALUE
<b>SUPPLY SYMBOL</b>
<b>SUPPLY SYMBOL</b>
<b>SUPPLY SYMBOL</b>
<b>SUPPLY SYMBOL</b>
Developed by element14 :<br>
element14 CAD Library consolidation.ulp
at 30/07/2012 17:04:24
>NAME
>VALUE
>NAME
>VALUE
CHIP INDUCTOR, 10UH, 150MA 5% 36MHZ
PHOTOTR
TEMP
RESIST
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.