#include <LiquidCrystal.I2C.h>

#include <usi_twi_master.h>

#include <tinywirem.h>

//usr

//To wire your Lcd I2C Display to your ATtiny85, connect the following pins :

//

//ATtiny85 Pin1 –> NC

//ATtiny85 Pin2 –> NC

//ATtiny85 Pin3 –> NC

//ATtiny85 Pin4 –> Ground

//ATtiny85 Pin5 –> LCD Sda

//ATtiny85 Pin6 –> NC

//ATtiny85 Pin7 –> LCD Scl

//ATtiny85 Pin8 –> +5V

//

LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);

void setup()

{

lcd.begin(16, 2);

//3 flash introduction

for (int i = 0; i< 3; i++)

{

lcd.backlight();

delay(150);

lcd.noBacklight();

delay(150);

}

lcd.backlight();

lcd.setCursor(2, 0);

lcd.print("Instructables");

lcd.setCursor(6, 1);

lcd.print("...");

}

void loop()

{

}