FABACADEMY
Princicples and Practice
Welcome to my week 1
Princicples And Practice
Outcome of the week
Schedule
Digital Fabrication ('h' for help, 'i' for index, videos linked)
Rights And Responsibilities
Assignment
Plan and sketch a potential final project
FINAL PROJECT PROPOSAL 1
ELECTRIC SKETEBOARD
Introduction
So as per my research there are a lot of company importing the parts from other countries so the minimum cost of an electrics skateboard in India is 700 usd to 100 usd so I have an idea to decrease the cost of around 300 to 350 usd In India a middle class people can effort this money.
Problems with current situation
In India there is a lot of polution incresing day by day pic given below so I tought to use any electrical vechiles which are easy to use and easy to operate etc..
Technologies can used:
Learning Outcomes:
Getting started with Mechanical Design
So I in future I want to start a business on this electric scooters and bicycles and also on skateboards.
So I have started designing of my skateboard just rough pencil sketch.
So I have started designing of my skateboard just rough pencil sketch.
Recent work
Next morning , I was fully charged and I ended up actually sketching the way I want my project to look like and sketched caricatures.
The components i am using in this project are:-
6.5 inch hub motor
RF module circuit
Battery
Motherboard
So my idea is to make design of RF module on printed circuit board so i will do that in comming weeks.
I will add some more features as early as possible
The sketeboard Diagrams given below
The Circuit Diagrams given below
“So sorry I cant continue this project beacause lack of bujget. But u all can watch is project in few days.”
FINAL PROJECT PROPOSAL 2
So after a long break I changed my project..
Now Project GARUDA. I named my project as GARUDA because the meaning of my name vynatheya is Eagle so the word eagle in telugu language is GARUDU so in that way I named my car as GARUDA. The fact behind my Project is both the eagle and my car works on air like eagle without air it can't fly and my car can't work without air.
REASON WHY ?
I like toys so I made this project for personal use . Just for fun...
How it works?
So as per my knowledge A Propeller “Lifts” Forward. Think of a propeller as a spinning wing. Like a wing, it produces lift, but in a forward direction—a force we refer to as thrust. Its rotary motion through the air creates a difference in air pressure between the front and back surfaces of its blades.
So my idea is to fix a Propeller on the top of the car in that way my car goes forward direction and i will use a servo motor for right and left direction. Picture given bellow
Technologies can used:
Laser cutting for motor
3D design and fabrication of body
Microcontroller operations for calculations and digital control
Bluetooth and networking
Motor control and positioning.
Vinyl cutting for attration.
Recent work
I was fully charged and I ended up actually sketching the way I want my project to look like and sketched caricatures.
The components i was using in this project are:-
BLDC motor
Bluetooth (master & slave)
Battery
Pcb
servo motor
ESC
So my idea is to make design of RF module on printed circuit board so i will do that in comming weeks.
I will add some more features as early as possible.....
So I in future I want to start a business on this electric scooters and bicycles and also on skateboards.
So I have started designing of my skateboard just rough pencil sketch.
So I have started designing of my skateboard just rough pencil sketch.
Recent work
Next morning , I was fully charged and I ended up actually sketching the way I want my project to look like and sketched caricatures.
The components i am using in this project are:-
So my idea is to make design of RF module on printed circuit board so i will do that in comming weeks.
I will add some more features as early as possible
The sketeboard Diagrams given below
The Circuit Diagrams given below
“So sorry I cant continue this project beacause lack of bujget. But u all can watch is project in few days.”
FINAL PROJECT PROPOSAL 2
So after a long break I changed my project..
Now Project GARUDA. I named my project as GARUDA because the meaning of my name vynatheya is Eagle so the word eagle in telugu language is GARUDU so in that way I named my car as GARUDA. The fact behind my Project is both the eagle and my car works on air like eagle without air it can't fly and my car can't work without air.
REASON WHY ?
I like toys so I made this project for personal use . Just for fun...
How it works?
So as per my knowledge A Propeller “Lifts” Forward. Think of a propeller as a spinning wing. Like a wing, it produces lift, but in a forward direction—a force we refer to as thrust. Its rotary motion through the air creates a difference in air pressure between the front and back surfaces of its blades.
So my idea is to fix a Propeller on the top of the car in that way my car goes forward direction and i will use a servo motor for right and left direction. Picture given bellow
Technologies can used:
Recent work
I was fully charged and I ended up actually sketching the way I want my project to look like and sketched caricatures.
The components i was using in this project are:-
So my idea is to make design of RF module on printed circuit board so i will do that in comming weeks.
I will add some more features as early as possible.....