Pin Header Connectors <author>Created by librarian@cadsoft.de</author> PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE >NAME >VALUE PIN HEADER Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE >NAME >VALUE non-polarized capacitor >NAME >VALUE LED >NAME >VALUE Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces LED Pin Header Connectors <author>Created by librarian@cadsoft.de</author> PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >VALUE >NAME >Name >Value >NAME >VALUE >NAME >VALUE 1 2 Crystals Various standard crystals. Proven footprints. Spark Fun Electronics SKU : COM-00534 Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. Standard 28-pin DIP package. IC needs to have legs bent before insertion. >NAME >VALUE Symbol for Atmega328/168/88/48 chips, 28-pin versions >NAME >VALUE uC used in the Arduino 32kb flash, 1k EEPROM, 2k SRAM This is the through-hole version of this chip. Pin Headers Naming: MA = male # contacts - # rows W = angled <author>Created by librarian@cadsoft.de</author> PIN HEADER 1 >NAME 6 >VALUE PIN HEADER >VALUE >NAME PIN HEADER Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.