>NAME <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b><p> wave soldering >NAME >VALUE >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE <B>Wide Plastic Gull Wing Small Outline Package</B> >NAME >VALUE <h3>Plated Through Hole - 2x3 Shrouded Header</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03x2</li> </ul></p> >NAME >VALUE <h3>Surface Mount - 2x3 Male Header with Keying Posts</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p><a href=”http://www.4uconnector.com/online/object/4udrawing/15881.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03x2</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 2x3 Pogo Pins</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03x2</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 2x3</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03x2</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 2x3 No Silk Outline</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03x2</li> </ul></p> >NAME >VALUE <h3>Surface Mount - 2x3</h3> <p>Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:2.54mm</li> </ul></p> <p>Example device(s): <ul><li>CONN_03x2</li> </ul></p> >NAME >VALUE (Black) (Green) >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME ATtiny45 <h3>6 Pin Connection</h3> 3x2 pin layout >NAME >VALUE <b>Resistor (US Symbol)</b> <p> Variants with postfix FAB are widened to allow the routing of internal traces <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> <p></p> <b>You can populate with any combo of single row headers, but if you'd like an exact match, check these:</b> <ul> <li><a href="https://www.sparkfun.com/products/12807"> Header - 2x3 (Male, 0.1")</a> (PRT-12807)</li> <li><a href="https://www.sparkfun.com/products/13010"> Header - 2x3 (Female, 0.1")</a> (PRT-13010)</li> <li><a href="https://www.sparkfun.com/products/10877"> 2x3 Pin Shrouded Header</a> (PRT-10877)</li> </ul> <p></p> <b>On any of the 0.1 inch spaced packages, you can populate with these:</b> <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> </ul> <p></p> <b>Special note: the shrouded connector mates well with our 3x2 ribbon cables:</b> <ul> <li><a href="https://www.sparkfun.com/products/10651"> Ribbon Crimp Connector - 6-pin (2x3, Female)</a> (PRT-10651)</li> <li><a href="https://www.sparkfun.com/products/10646"> Ribbon Cable - 6 wire (15ft)</a> (PRT-10646)</li> </ul> <h3>SparkFun Connectors</h3> This library contains electrically-functional connectors. <br> <br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. <br> <br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. <br> <br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br> <br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Plated Through Hole - 3 Pin</h3> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> <p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH</h3> <p>Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Locking Footprint</h3> Pins are staggered 0.005" off center to lock pins while soldering. <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint</h3> Holes are offset 0.005" from center to lock pins in place while soldering. <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> Pins are offset 0.005" from center to lock pins in place during soldering. <p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH Locking</h3> Holes are offset 0.007" from center to hold pins in place during soldering. <p>Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 3 Pin No Silk Outline</h3> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Long Pads</h3> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>JST 3 Pin Right Angle Plated Through Hole</h3> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> + - S >NAME >VALUE <h3>Pogo Pins - 3 Pin</h3> <p>Specifications: <ul><li>Pin count:3</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Screw Terminal 5mm Pitch -3 Pin PTH</h3> <p>Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 5mm/197mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline</h3> Holes are offset from center 0.005" to lock pins in place while soldering. <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>JST 3 Pin Right Angle SMT</h3> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>Plated Through Hole - 3 Pin SMD</h3> <p>Specifications: <ul><li>Pin count:3</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>SMD - 3 Pin Right Angle Female Header</h3> Silk outline of pin location <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>SMD- 3 Pin Right Angle Male Headers</h3> No silk outline, but tDocu layer shows pin location. <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> <p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>JST 3 Pin Vertical Plated Through Hole</h3> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> + - S >NAME >VALUE <h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> <p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> <h3>JST 3 Pin Right Angle Plated Through Hole &ndash; NO SILK</h3> <p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p> <p>Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> + - S >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH &ndash; NO SILK</h3> <p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p> <p>Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): <ul><li>CONN_03</li> </ul></p> >NAME >VALUE <h3>3 Pin Connection</h3> >VALUE >NAME <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> <b>On any of the 0.1 inch spaced packages, you can populate with these:</b> <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> <li><a href="https://www.sparkfun.com/products/13875"> Stackable Header - 3 Pin (Female, 0.1")</a> (PRT-13875)</li> </ul> <p></p> <b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> <p></p> <b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> <p></p> </ul> <p></p> <b>Special notes:</b> <p> </p> <p> </p> Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings.