Yet another fabable ISP (In System Programmer), this time based on the FabTinyStar board, which was specificly designed to be made in a FabLab.
It includes a few extra features such as a target power led and switch, a reset button and a led on the SCK line to indicate communication in progress.
The original documentation (downloads too) can be found at: http://fabacademy.org/archives/2015/doc/projects/FabTinyStar/index.html
In this guide we'll be using the 5V version 0.3 (Bas).
Unfortunately this documentation isn't as polished as I want yet, but all the information you need to make one yourself should be here.
Some stuff you're going to need...
Alternatively you can download the original sources with a fresh copy of the vusb driver and build them yourself as described in the "programming" chapter.
This project uses/is based on/inspired by the work of numerous people, including:
|MISO (Brown)||1||2||(Red) Vcc|
|SCK (Orange)||3||4||(Yellow) MOSI|
|Reset (Green)||5||6||(Blue) Ground|
|USB D+ (Purple)||7||8||(Gray) USB D-|