Currently regimes of cutting are presented under machine name with further tested parameters for best quality of cutting. Depending on the material you can choose to use the best parameters.
Machine: GCC LaserPro Spirit GX
Further information on the machine itself can be found at: http://laserproi.com
Machine characteristics
| Technology | Material type | Material thickness | Result |
| Press-fit | any | 3 mm | 0.5 mm is burnt from ideal shape border |
Material: acrylic
| Speed | Power | Material thickness | Result |
| 10% | 80% | surface burn | no cut, hairline reference contour |
| 0.2% | 80% | 6 mm | clear cut with one run |
| 0.3% | 80% | 3 mm | clear cut with one run |
| 0.7% | 80% | 3 mm | reasonable cut with 2 runs |
| 0.2% | 80% | 3 mm | cast polycarbonate (transparent), 1 run |
Material: plywood
| Speed | Power | Material thickness | Result |
| 4% | 90% | 3.5 mm | clear cut with one run |
Material: hard carton
| Speed | Power | Material thickness | Result |
| 1.4% | 80% | 4 mm | cut top side only, mark bottom side for knife cutting |
![[logo.png]](%2bdownload/logo.png){kind=logo}
